Training

Adjustable Kettlebell Progress Needs Loads and Rest Logs

By

In short

Log adjustable kettlebell loads, not setting numbers: REP's kg models use 2 kg steps, while BowFlex uses uneven lb jumps in the November 13, 2026 source. fairlift suggests recording adjustment time within the gap between sets.

Moving up one setting adds 2 kg on REP's kilogram models, but the next setting on a BowFlex SelectTech 840 does not always add the same amount. A setting number is an equipment label, not a consistent measure of progression. fairlift's logging suggestion is to read the actual load, repetitions and gap before the next set together, rather than giving every dial movement the same meaning.

How much does the next setting actually add?

Specifications and adjustment methods in the November 13, 2026 Men's Health source
ModelLoad incrementsAdjustment method
REP8–16 kg and 16–24 kg models: 2 kg steps. 10–40 lb model: 5 lb stepsTurn the top dial, then lift off the weight stack
BowFlex SelectTech 8408, 12, 20, 25, 35 and 40 lbTop dial
Bells of SteelPlates can be added in 0.5 kg incrementsAllen wrench and conventional wrench; the source describes a change taking a few minutes

On the BowFlex, moving from 12 to 20 lb adds 8 lb; moving from 20 to 25 lb adds 5 lb. Those differences are arithmetic from the listed settings, not results from a training trial. REP's kilogram and pound versions also need separate entries. Keep the model, unit and selected load explicit. If the next available load is still out of reach, the log can show whether repetitions at the current load have changed without pretending that a heavier setting was used.

Where should adjustment time go in the log?

  1. Record when the set ends and when the next one starts, preserving the full interval between sets.
  2. Mark how much of that interval was spent adjusting the bell. Distinguish a tool-assisted change from turning a dial.
  3. Read the interval alongside the exercise, load and repetitions when comparing sessions. If the load changes, do not bundle the pace of an entire circuit into the same progress claim.

The Bells of Steel mechanism requires undoing the bottom bolt, removing the lower shell and loosening the screw that holds the plates before changing the load. A fine weight increment and a quick transition are separate properties. fairlift suggests planning where changes will happen in a circuit and placing tool-based adjustments between exercises. The clock keeps running during setup, so retain the full between-set interval even when part of it was spent handling tools. This is a way to make a training diary easier to interpret, not a prescribed recovery duration.

The source is a product comparison, not an experiment establishing an overload protocol or an optimal rest period. Specifications here are dated November 13, 2026; the logging procedure is independent fairlift editorial advice. fairlift did not time these products.

For the starting-load question, see choosing a kettlebell weight. Keep accessory progression in its own training notes. The Muscle Index calculator takes squat, bench press and deadlift one-rep maxes; moving a kettlebell dial upward does not establish a new Big 3 one-rep max.

Frequently asked questions

Does moving up one adjustable kettlebell setting mean equal progress?

The load jump depends on the model and setting. In the November 13, 2026 Men's Health source, REP's kg models use 2 kg steps, whereas BowFlex 840 offers 8, 12, 20, 25, 35 and 40 lb. Log the actual load and unit rather than the setting number.

Should kettlebell adjustment time appear in a rest log?

fairlift suggests recording the full interval from the end of one set to the start of the next, with adjustment time marked separately inside it. That distinguishes a longer tool-assisted transition from a session with shorter intervals.

Do 0.5 kg increments make circuit changes easier?

Fine loading and fast adjustment are different features. The source describes Bells of Steel plates being added in 0.5 kg increments, but changing them requires two types of wrench and takes a few minutes.

Can kettlebell progression update my Muscle Index?

Muscle Index uses squat, bench press and deadlift one-rep maxes. Compare kettlebell progression in accessory notes rather than substituting it for a Big 3 one-rep max.

Source: Men's Health Fitness (published )

Calculate your strength score →

Enter your Big 3 lifts and bodyweight for a relative strength score corrected for age and height. Free, no account needed.

Keep reading